Door Handle Replacement
Door handles seem like something minor but if you aren't happy with the way they look or are finding them difficult to use and use, you should consider replacing them. With a bit of patience, you can get an entirely new handle in a short time.
Most modern door handles have cover plates that hide the screws to create a stylish appearance. If your new handle doesn't have them already connected, you'll need to attach them separately.
Remove the old Handle
The door handle is not just a decorative feature for your home it also serves as a safety feature that allows you to lock and unlock the door. But, over time, your door handle may lose its grip, appear loose, or appear old and worn. This is a good indication that it's time to replace the door handle.
One of the first signs that your door handle is in need of replacing is if it's becoming difficult to operate. This is a problem since it means you can not lock or unlock your door which could create the risk of security for you and your family.
Another reason to replace your door handle is when it's damaged or broken. A damaged or broken door handle is dangerous, especially for elderly or children members who struggle to open it. They may get trapped. It's simple to replace a damaged handle on the door.
The majority of modern door handles are standard size, so they will fit on any door. If you aren't sure if the new door handle you are buying will work, take off the old one and measure its housing holes. This will allow you to purchase the right size door handle.
The most straightforward method to take off your old door handle is to unscrew it from the door. Usually you'll need a screwdriver. Some door handles have the cover plate, which conceals the screws that mount them. official statement 'll need to remove it to get to the screws. After removing the old handle, make a note of the way in which the spindle has been connected. This will assist you in aligning the new handle.
You can also remove the door handle by uncrewing it from the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which is located just to the left of the trim piece. Once you've removed the latch, you'll need to unscrew the handle from the strike plate, and then the latch off the door's edge.
Removing the Strike Plate
When you replace your handle, you'll want to replace the latch plate that holds the hole which the door's latch hooks into when it closes. The packaging that the new handles arrive in will include two latch plates - one that is rectangular and the other circular (see the diagram above for the parts of the door handle). If you have an rectangular latch plate, swap it with an oval one. This will let the latch hook into the strike plate and make the handle more convenient.
The first step is to remove the screw that holds the old latch plate. The screws are usually quite tight and require a bit of force to loosen them. If you can, it might be beneficial to have another person assist you with this task.
The latch plate should be removed from the door once the screws have been removed. If it's stuck or won't move using a nail file to scrape around the edges of the latch plate. This may help free the plate.
You can now move on to creating the new door strike plate to be installed. Attach the latch plate to the doorjamb using the wood screws that were included with your new handles. Be careful not to over-tighten the screws, as this can cause damage to the strike plate.
If you are not sure whether the latch plate is in its correct position, close and open the door to see if it latches and closes properly. If it does not you'll have to adjust the strikeplate upwards or down, forward or back until the door closes properly.
If the door is moving or jiggling, you may need to enlarge the hole for the latch in the strike plate. This is more common for older doors, but can happen due to wear and tear, hinge mortises that are too shallow or are not sized correctly for the latch, or from damaged or broken strike plate. If this is the case, follow the same procedure as adjusting the strike plate, using the use of a metal file instead an hammer and chisel.
Take off the Latch
The latch is a bent metal piece which slides in and out of a hole in the inside of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also connects to a hole in the frame of the door to keep the door closed. If your door wobbles when you close it, replacing the latch could be the only thing needed to correct the issue.
It's difficult to see the screws that secure the latch to the door, but there's usually a tiny slot on the trim plate that lets you to insert a screwdriver and remove it. After you've removed the trim plate, it should be simple to remove the latch and the bolts that keep the spindle and latch in place.
If the latch doesn't easily release you can try using the clip of a paper or tool to free it from the handle mechanism. Insert the item into the recessed slot of the latch and then gently twist or jiggle until you feel the that the latch and handle begin to separate. It is possible to repeat this process several times before you are able to remove the latch.
Once the old latch is removed, you should be able to slide the new latch into the slot without any problems. Use your new screws to secure the latch to the strike plate or door frame. Make sure it's correctly placed in the slot and aligned with the screw chambers.
Take note of the backset (the distance between the center of the large hole in the front of the door and the edge) prior to installing the new handle. Verify that the size of the latch of the new handle matches the measurement.
You'll require a new cylinder for your lock if replacing the handle and latch or if your current one is damaged. If you're not changing locks, however, a new latch will fit into your existing recess and will work with your current keys. Be sure to choose a latch with rectangular cover plates that match your handles.
Removing the Cover Plate
You can replace your old door handles with a modern lever and rose design to enhance the appearance of your house. You can buy complete sets of escutcheons, privacy adaptors, escutcheons, and escutcheons.
To replace an internal door handle take off the cover plate (or rose), which protects the screws and the inner mechanism. Look for an release tab on the plate and use a flathead screwdriver to remove it from the knob. It could have an opening along one side or be held in place by a pin.
Once the cover plate is off, remove the screw that holds the interior handle in place and set it aside. You'll also need to take out the screws that hold the latch and the plates inside, which you can do by loosening them using a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and set them aside.
Most doors have gaps between the door jamb and the edge of the frame that allows for a handle, however not all do. If yours doesn't, you'll need to make a hole in the door to install the new handle. The process for doing this is similar to the procedure for opening a door with the lock, however you'll have to be extra careful not to damage the door or frame.
Installing new door knob screws is necessary after holes have been drilled. Choose the same size as the old screws to ensure that you don't get a handle too tight or loose. You'll also have to install an additional strike rod and latch plate that aren't part of most door handle sets.
If you're in search of a reliable replacement interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's factory-fitted and has been praised with hundreds of five-star reviews. It's a great option for replacing worn or damaged interior door handle hardware on your Chevy HHR.